Interfaces

Thanks to the various interfaces, the adaptors can be used with any portable valve actuator and any head (straight, right angle or banjo).

They also enable you to use the actuators for applications other than activating valves and on many types of interface other than handwheels.

Using the KPA interface, you can manipulate the SAxxx, SUAxxx and FUAxxx adaptors without a banjo head.

Please note, this configuration is not compatible with handwheels that have a rising stem.

The KPA interface is available in 3 versions:

KPA003 for the SA003 adaptor
KPA004 for the SA004, SUA and FUA adaptors
KPA005 for the SA005 and SA007 adaptors

These protectors, integrated into the self-adjusting and self-centering fingers adaptors (SAxxx), are designed to protect the handwheel from being scratched during use.

They can be built into the adaptor during assembly in the factory or added later without difficulty.

They are made from high performance polyethylene, which is anti-static and resists wear and tear. Each adaptor has a corresponding interface:

SA103 for the SA003 adaptor
SA104 for the SA004 adaptor
SA105 for the SA005 adaptor
SA107 for the SA007 adaptor

We have a wide range of extension bars which enable operators to move away from the handwheel or valve, notably in the case of tapered handwheels and underground / buried valves. Light and robust, they can be used on rising stems with two maximum diameters: 30mm or 50mm.

The EBX01 and EBX02 extension bars fix directly on to the CSA, CSB, FSA and FSB adaptors by one or more screw.

The EBX03 and EBX04 extension bars fix on to the FUA adaptors using the TTA interface.

All the extension bars can be adapted for use on the actuators using the TTA interface for the banjo heads and the KTA interface for straight and right angle heads.

The EB001 telescopic extension bar is specifically adapted for manipulating underground / buried valves. On one end it has a square ¾” male connector that connects to a standard socket. It can be activated either by a straight or right angle actuator (with the KHA001 interface, see below), or by an actuator with a banjo head (using the KHA002 interface, see below).

Interfaces

INQUIRY